Accessories

Overview

Load Cell Simulator LCS 85

Mini-Sim 100

Load Cell Simulator LCS 85
and Mini-Sim 100

The LCS-85 is a measuring instrument designed for use calibration, servicing, testing or constructing electromechanical weighing systems. The unit is capable of simulation the operation of all strain gage load cells with a sensitivity of up

to 3mV/V.
( 0,1µV bis 2999,9 µV ) R = 120 Ohm

As a high precision instrument, the LCS-85 is calibrated to provide the utmost measurements accuracy.

Simple Load Cell simulator with operation about

Potentiometer .
Not suitable for calibration

HI 2151 IT
IT® J-Box
Load Point Junction Boxes with INTEGRATED TECHNICIAN

The HI 215IT Series Junction Box can be used with up to four, eight conductor load sensors or cells. It supports C2® electronic calibration and INTEGRATED TECHNICIAN® for system diagnostics and troubleshooting.

The B+L Hardy C2® certified Junction Box contains circuitry in a waterproof enclosure which distributes the excitation voltage to up to four load points and transfers each load point's performance characteristics and weight signals to the weight controller. The junction box, without being opened, allows an instrument operator to switch in an internal test circuit to test the stability of the cable from the junction box to the "IT" equipped weighing instrument. In addition, individual load sensors can be isolated for weight and voltage readings all from the weighing instrument's front panel.
The box's unique removable multiple connector design allows for easy isolation and troubleshooting of non-"IT" capable weighing systems. Available in NEMA 4 rated painted steel, NEMA 4X rated stainless steel or fiberglass, each box comes with two packaged hole plugs and five cable grip fittings suitable for O.D. cable of 1/4 to 3/8 inches. A label is provided on the underside of the top cover to record load point positions. A non-C2 version with trim pots is also available

HI 2151 JT
Standard J-Box
C2® Certified Summing Junction Box

The HI 215JB Series Junction Box can be used with up to four, eight conductor load sensors or cells and supports C2® electronic calibration.
The Hardy Instruments C2® certified Junction Box contains circuitry in a waterproof enclosure which distributes the excitation voltage to up to four load points and transfers each load point's performance characteristics and weight signals to the weight controller.

The box's unique removable multiple connector design allows for easy isolation and troubleshooting of non-"IT" capable weighing systems. Two junction boxes can be cabled together to handle up to eight load cells from a single scale.

Available in NEMA 4 rated painted steel, NEMA 4X rated stainless steel or fiberglass, each box comes with two packaged hole plugs and five cable grip fittings suitable for O.D. cable of 1/4 to 3/8 inches. A label is provided on the underside of the top cover to record load point positions. A non-C2® version with trim pots is also available.

C2 Cable
Eight conductor "Home Run" cable

C2(R) certified, eight conductor cable to be used from the junction box to the instrument. Required for C2 installations.

B+L Hardy C2(R) certified "Home Run" cable is designed specifically to handle the low voltage weight and data signals found in weighing systems, as well as the load senors performance characteristics and switching commands.
Eight conductors carry the signals to and from the weight controller and the junction box up to 1000 feet away. Each conductor is 22 AWG stranded copper wire for flexibility. The cable has a braided, tinned copper shield and a mylar barrier tape wrap. The outer jacket is vinyl and is 0.060" thick.